How do you reset the drum on a Brother printer HL 2170w?
To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off.
How long does a printer drum unit last?
Over time, the drum unit deteriorates and eventually needs to be replaced. Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.
When should a laser printer drum unit be replaced?
As a general rule, you should always replace your drum unit after using three to four toner cartridges just to be safe.
How long do Brother drums last?
Under ideal conditions, the average drum life is estimated at approximately 15,000 pages. The actual number of pages that your drum will print may be significantly less than this estimate.
How long does a Brother drum unit last?
Does drum color matter?
In others, it really makes no difference. For the most part, this is a matter of personal preference. But the way your drum set looks can shape the way that people might look at you, your band, and your ability to play the drums.
How do I reset the drum counter on my Brother printer?
Put the drum unit and toner cartridge assembly back in the printer. Reset the drum counter. Press and hold down the white button (shown as blue in the image below) for about 4 seconds until all the LEDs light up. Once all 4 LEDs are lit, release the button.
Where can I find the Order Number (Order No) of the drum?
For the order number (Order No.) of the drum unit, please refer to the User’s guide provided with your Brother Printer or the Consumables & Options page of your model on Brother Solutions Center.
How do I reset the drum counter to default settings?
Reset the drum counter. Press and hold down the white button (shown as blue in the image below) for about 4 seconds until all the LEDs light up. Once all 4 LEDs are lit, release the button.
How do I change the drum unit of my toner?
Exposure to direct sunlight or room light may damage the drum unit. Put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in properly, the green lock lever will lift automatically. Make sure that you put in the toner cartridge properly, or it may separate from the drum unit.