How do I update my Actron CP9135?
How to Update an Actron PocketScan Plus
- Download the Actron Software Suite (see Resources).
- Click on “Tool Update” when the program starts.
- Click “Next.” Select “Detect Device Automatically,” then click “Next” again.
- Choose your update from the list.
- Wait until the update progress meter is full.
How do I update my Actron Auto Scanner?
Open Scanning Suite on the PC by double clicking the Actron LaunchPad shortcut or clicking start/All Programs/Scanning Suite/Actron/LaunchPad. 5. Click Tool Update.
What does INC mean on scan tool?
Incomplete
On your scan tool, for monitors which your vehicle is equipped with, you should either see an “INC”, representing Incomplete, or “READY”, indicating the monitor has passed its self-test and is ready for inspection.
What is IM monitor status?
The I/M Monitor Status icons are associated with INSPECTION and MAINTENANCE (I/M) READINESS STATUS. Some states require that all vehicle Monitors have run and completed their diagnostic testing before a vehicle can be tested for Emissions (Smog Check).
Should MIL status be on or off?
MIL (Malfunction Indicator Lamp) status indicates if the vehicle com- puter is telling the MIL to illuminate when the engine is running. MIL ON indicates that the check Engine Light should be ON. MIL OFF indicates that the Malfunction Indicator Lamp should be OFF.
How do I use Actron AutoScanner CP9575?
CP9575 AutoScanner
- Power the tool on.
- Arrow down to System Setup and press ENTER.
- Arrow down to Tool Information and press ENTER.
- The SWID displayed is the software version in your tool.
What is Actron’s warranty policy?
DISCLAIMER OF WARRANTY ACTRON DISCLAIMS ALL EXPRESS WARRANTIES EXCEPT THOSE THAT APPEAR ABOVE. FURTHER, ACTRON DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OF THE GOODS OR FITNESS OF THE GOODS FOR ANY PURPOSE.
What are the power requirements for the autoscanner?
e AutoScanner requires a Th minimum of 8 volts between pin 16 (BAT+) and pin 4 (GND) to power up. Use the flowchart provided below to troubleshoot.
Can Actron be liable for damages?
IN NO CASE SHALL ACTRON BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED UPON ANY LEGAL THEORY INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOST PROFITS AND/OR INJURY TO PROPERTY.
How does the autoscanner work with connect?
Connects the AutoScanner to the vehicle for power and communication. The AutoScanner will automatically communicate with the vehicle using a protocol built into the software After initiating a function, the AutoScanner will link with the vehicle. 2.1.3 Cleaning Do not use solvents such as alcohol to clean the keypad or display.